Moms Like You Choose ApMot Cleaning Service
What is cleaning service?
Since we are going to be conversation about
cleaning, or, more specifically, industrial parts cleaning, it’s probably best
that we explain what we mean by “cleaning.”
Cleaning is the method
of removing unrequired materials, such as dirt, infectious agents, and other
impurities, from an article or atmosphere. Cleaning occurs in many different
contexts, and uses many different methods. Cleaning to remove
dirt does nothing to change the surface of the part leaving it just as it was
but without the dirt.
Cleaning” methods are technically “surface action.
These methods may be chemical or mechanical in nature and modify the surface of
the part being cleaned in one way or another but without significantly changing
the remaining substrate. The removal of surface oxides prior to plating is
a good example of surface treatment.
Types
of cleaning method
1.
Manual cleaning method
2.
Mechanized cleaning method
Types
Manual cleaning method Mechanized cleaning Method
1.
Sweeping 1. Suction
cleaning
2.
Dusting 2. Vacuum cleaning
3.
Damp Dusting 3. Spray
buffing
4.
Dust Mopping 4. scrubbing
5.
Dry Mopping 5. Stripping
6.
Mop sweeping 6. Laundering
7.
Spot sweeping 7. Dry cleaning
8.
Wet Mopping
9.
Damp Mopping
10.
Manual Scrubbing
11.
Manual polishing
12.
Spot cleaning
Problem
& solution
1. Colored stains
Brush the area with a stiff brush and
flush the residue away with water.
Several
brushings may be required.
2. Rust stains
Treat stains with a rust remover. If stains are in toilet
bowl, use a toilet
Bowl
cleaner that contains an acid.
3. Soils and stains
Scour with a powdered oxygen bleach or use liquid household bleach.
4. Dull, discolored appearance
Treat with a hard
water mineral remover.
5. Drain not cleared with use of a drain opener
Repeat the application of a drain opener in badly clogged drain. If
three applications of a drain opener fail to remove the clog, the services of a
plumber are necessary.
6. Hardening of a dry drain opener in the drain
Let water trickle into the drain for an extended period of time to
dissolve the product.
7. Sticky surface
Increase the amount of an all-purpose cleaner to loosen and help remove a wax buildup.
It may be necessary to use a wax remover or a solution of one cup ammonia + 1/4 cup powdered floor cleaner added to each 1/2 gallon of water.
It may be necessary to use a wax remover or a solution of one cup ammonia + 1/4 cup powdered floor cleaner added to each 1/2 gallon of water.
8. Shine removed
Rinse floor thoroughly to remove all traces of the cleaning solution.
9. Streaking
Use
another application of polish. Rub thoroughly, using a soft clean cloth; turn
it frequently to a clean side.
10. Wax buildup
More vigorous buffing, using a clean cloth.
11. Dulling of finish
Between polishing, use a cloth treated with a dusting aid.
12. Dust attraction
More vigorous buffing, using a soft, clean cloth.
13. Smudges on glass
Use two applications of
glass cleaner. Spray glass generously with cleaner and wipe with a clean, dry
cloth or paper towel. Then, respire lightly with glass cleaner and polish with
another clean, dry cloth or paper towel.
14. Streaks on glass
Apply glass cleaner and wipe off with a clean, dry cloth or paper towel.
Use clean, dry cloth or paper towel.
Use clean, dry cloth or lower absorbency paper towel.
Use clean, dry cloth or paper towel.
Use clean, dry cloth or lower absorbency paper towel.
15. Difficulty in removing cream glass cleaner
Allow
cream glass cleaner to dry completely before it is removed. Use a clean, dry
cloth to remove the residue.
16. Cream glass cleaner trapped in crevice
Allow the cleaner to dry
thoroughly. Use a soft brush to remove the powder residue.
17. Spots on exterior surfaces
Clean with a glass or
glass and multi-surface cleaner, gently rubbing spots.
Comments
Post a Comment